Single storey vents (aluminum alloy)
Single layer adjustable Louvre tuyere is usually used for suction and air supply in pipeline. At the same time, it can be used to control air volume or install aluminum alloy filter for matching use according to actual situation. The blades can be divided into two kinds: horizontal and vertical, which can be flexibly left or right or upward to control the direction of air flow.
The air flow regulation direction of the single storey vents is one of the two directions, but it is one of these directions. But the air flow adjustment direction of the double blonde vents is two-dimensional, with two directions of horizontal and vertical.
It is usually installed on the pipe or side wall as a side air vent. The double blower vane has two adjustable angle moving blades. The short blade is used to adjust the diffusion angle of the air flow and can also be used to change the direction of the air flow; while adjusting the long blade, the air flow can be attached to the ceiling or down to a certain angle (when heating the air). The vane of the outer leaf or single layer louver can be parallel to the long side or parallel to the short side, and can be selected according to the requirements of the customers.
Characteristic
1, single layer adjustable blade, different air supply distance and diffusing angle can be obtained.
2. It can be used as air outlet and air return.
3. Can be made of aluminum or iron.
4. It is used separately with the regulating valve for the outlet.
5. For the return vent, it can be made into an open structure and used in conjunction with the filter screen.