Light foil for surface cooler
Release:Zhengyang air conditioning | Time:2018/5/10 10:18:39
The function and use of the product
The product is an aluminum sheet type heat exchanger with copper tube. It adopts advanced mechanical pipe and circular corrugated double flanged aluminum rib. The copper tube is closely connected with the aluminum fin. The circular arc ripples can promote the turbulent flow, destroy the boundary layer and improve the heat transfer coefficient. The advanced structure type, plus the waterway stroke, the distance between the tubes and the design of the distance between chips, make the heat exchanger have the characteristics of good heat exchange performance, small air resistance, strong corrosion resistance, compact structure, light weight and beautiful appearance. The 4 row tube /6 tube /8 tube and so on can be ordered according to the customer needs.
Two. The characteristics of the product:
The design of 1. corrugated hydrophilic aluminum sheets is conducive to condensation and slipping of condensed water.
2. advanced processing technology, using two flanging, copper pipe string aluminum sheet, mechanical pipe process and made of.
Three. The scope of application:
It can be widely used in air conditioning, cooling, dehumidification, heating and other heat exchange machines.
The main products are: industrial chiller, screw chiller, mold temperature machine, hopper dryer, box type air dryer, honeycomb dehumidifier, dehumidifier feeding three in one mould, defrosting machine, air cooling machine, suction machine, mixer, plastic injection molding machine and grinder peripheral auxiliary equipment
Four. The installation and use of the surface cooler.
The 1. table cooler should be equipped with a special support, which is not allowed to support the surface cooler with a nozzle.
The water supply of 2. surface cooler should have good insulation measures to reduce heat loss or avoid pipeline frosting.
3. the highest point of the cold and hot water pipe should be set up the exhaust point, and the lowest point should be set up the drain pipe.
Do not use the winter surface air cooler, the remainder should be exhausted water, to avoid freezing cracking of brass.
4. the cold and hot water used for the cooling device of the table is not allowed to have sand, rust, fiber and other impurities.
Related Information